← All programs

Automotive Service Technology program

Twelve courses taken in order, modeled on Ferris State University’s Automotive Service Technology (AAS) with the Sustainable Transportation Service (AAS) for hybrid and electric vehicles — from engine repair and electrical systems to a certification-prep capstone that readies you for the ASE A1–A9, L1, and L3 tests.

$50 per program · first class free — your first course is free once you sign up, then $50 unlocks the whole program.

12 courses · free to start — sign up to enroll and track your progress.

Engine Repair (ASE A1)

The on-ramp course of the Automotive Service Technology program, modeled on Ferris State University's Automotive Service Technology AAS (AUTO 114 Automotive Engines) and the ASE A1 task list. This course starts in plain words — how an engine works, shop safety, and tool basics — then builds through engine diagnosis (compression, leakdown, and vacuum testing), the cylinder head and valve train, the engine block and internal parts, lubrication, cooling, intake and exhaust, turbocharging and supercharging, engine removal and installation, rebuild and machining basics, and gaskets, seals, and fasteners, closing with a full engine-diagnosis review. It starts preparation toward ASE A1 Engine Repair certification and Master Automobile Technician status.

Step 1 of 12 · Automotive Service Technology program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical / Electronic Systems (ASE A6)

Step 2 of the Automotive Service Technology program, modeled on Ferris State University's Automotive Service Technology AAS (AUTO 113 Auto Electricity-Electronics and AUTO 213 Chassis Electrical-Electronics) and the ASE A6 task list. Electrical diagnosis underpins almost everything after it, especially engine performance. This course builds from electrical fundamentals and Ohm's law through batteries, starting and charging systems, lighting and accessories, wiring diagrams and schematics, multimeter and scope diagnosis, electronic controls and modules, CAN bus and networks, voltage drop and parasitic draw, and hybrid and electric-vehicle electrical safety, closing with a full electrical review. It starts preparation toward ASE A6 Electrical / Electronic Systems certification and Master Automobile Technician status.

Step 2 of 12 · Automotive Service Technology program

Builds on Engine Repair (ASE A1) — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Automatic Transmission / Transaxle (ASE A2)

Step 3 of the Automotive Service Technology program, modeled on Ferris State University's Automotive Service Technology AAS (AUTO 211 Automatic Transmission). This course covers how automatic transmissions and transaxles work — hydraulics, the torque converter, planetary gearsets, clutches and bands, the valve body and solenoids, electronic controls and the TCM, and CVTs — then diagnosis with road tests and pressure tests, removal and installation, overhaul, and transaxle and front-wheel-drive differences, with hands-on shift-complaint and pressure-test labs. It prepares you for the ASE A2 Automatic Transmission / Transaxle test.

Step 3 of 12 · Automotive Service Technology program

Builds on Engine Repair (ASE A1) — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Manual Drive Train & Axles (ASE A3)

Step 4 of the Automotive Service Technology program, modeled on Ferris State University's Automotive Service Technology AAS (AUTO 111 Manual Transmission-Drivelines). This course covers clutch systems, manual transmissions, transaxles, driveshafts and U-joints, differentials, AWD and 4WD, noise and vibration diagnosis, removal and installation, overhaul, fluids and lubrication, and CV joints and axles, with hands-on clutch-diagnosis and driveline-vibration labs. It prepares you for the ASE A3 Manual Drive Train & Axles test.

Step 4 of 12 · Automotive Service Technology program

Builds on Engine Repair (ASE A1) — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Suspension & Steering (ASE A4)

Step 5 of the Automotive Service Technology program, modeled on Ferris State University's Automotive Service Technology AAS (AUTO 115 Suspension-Steering-Alignment). This course prepares you for the ASE A4 Suspension & Steering test: suspension fundamentals, springs, shocks and struts, steering systems, power steering and EPS, wheel alignment (camber, caster, toe), tires and wheels, handling, noise and vibration diagnosis, replacement procedures, electronic suspension and steering, TPMS, and alignment equipment and procedures — with hands-on alignment-numbers and handling-diagnosis labs.

Step 5 of 12 · Automotive Service Technology program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Brakes (ASE A5)

Step 6 of the Automotive Service Technology program, modeled on Ferris State University's Automotive Service Technology AAS (AUTO 112 Automotive Brake Systems). This course prepares you for the ASE A5 Brakes test: brake fundamentals and hydraulics, disc brakes, drum brakes, master cylinder and power assist, ABS, traction and stability control, parking brakes, brake diagnosis (pull, noise, pedal), brake service procedures, brake fluid and bleeding, and electronic brake systems — with hands-on brake-pull and ABS-code diagnosis labs.

Step 6 of 12 · Automotive Service Technology program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Heating & Air Conditioning (ASE A7)

Step 7 of the Automotive Service Technology program, modeled on Ferris State University's Automotive Service Technology AAS and its AUTO 214 Automotive HVAC course. This course prepares you for the ASE A7 Heating & Air Conditioning test: HVAC fundamentals and heat transfer, the refrigeration cycle with R-134a and R-1234yf, compressors, condensers, evaporators and expansion devices, heating systems, automatic climate control, gauge and leak-detection diagnosis, recovery, recycling and service including EPA 609, electrical controls, air distribution and cabin filters, and hybrid and EV HVAC — with hands-on gauge-reading and leak-detection labs.

Step 7 of 12 · Automotive Service Technology program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Engine Performance (ASE A8)

Step 8 of the Automotive Service Technology program, modeled on Ferris State University's Automotive Service Technology AAS and its AUTO 117 Electronic Fuel Management Systems course. This course prepares you for the ASE A8 Engine Performance test: engine performance fundamentals, ignition systems, fuel systems and injection, air induction and forced induction, emissions including EGR, EVAP and the catalytic converter, OBD II and scan tools, sensor diagnosis, driveability diagnosis, misfire diagnosis, fuel trim and waveform analysis, and I/M testing and readiness monitors — with hands-on fuel-trim and misfire-diagnosis labs.

Step 8 of 12 · Automotive Service Technology program

Builds on Electrical / Electronic Systems (ASE A6) — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Light Vehicle Diesel Engines (ASE A9)

Step 9 of the Automotive Service Technology program, modeled on Ferris State University's Automotive Service Technology AAS. This course prepares you for the ASE A9 Light Vehicle Diesel Engines test: how diesel engines work, common rail and HEUI fuel systems, turbocharging and aftertreatment (DPF, SCR, DEF), glow plugs and starting, smoke and hard-start diagnosis, diesel emissions and diagnostics, electronic controls, fuel quality and filtration, and diesel service procedures — plus how diesels differ from gasoline engines. Note: A9 is a separate diesel specialty and does not count toward ASE Master Automobile Technician status, which is A1–A8 only. Practice work in this course teaches the material; the real A9 test is taken at a Prometric center, booked through ASE.

Step 9 of 12 · Automotive Service Technology program

Builds on Engine Performance (ASE A8) — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Advanced Engine Performance Specialist (ASE L1)

Step 10 of the Automotive Service Technology program, modeled on Ferris State University's Automotive Service Technology AAS. This course prepares you for the ASE L1 Advanced Engine Performance Specialist test: advanced powertrain diagnosis, computerized powertrain controls and OBD II, network (CAN) communication diagnosis, advanced ignition and fuel-system diagnosis, emissions and I/M failure diagnosis, waveform analysis with a scope, intermittent-fault strategies, and driveability case studies — including practice with the Composite Vehicle Type 4 (CV4). The real L1 test gives you ASE's Composite Vehicle Type 4 Reference Booklet on screen, and about half its questions are about that vehicle; the app cannot reproduce ASE's booklet, so this course puts the practice vehicle's data in the question stems and lab givens instead. Important: ASE will not let you register for L1 until you have passed A8, and L1 requires 3 years of hands-on work experience to certify. Practice work in this course teaches the material; the real L1 test is taken at a Prometric center, booked through ASE.

Step 10 of 12 · Automotive Service Technology program

Builds on Engine Performance (ASE A8) — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

ASE L3: Light Duty Hybrid / Electric Vehicle Specialist

Step 11 of the Automotive Service Technology program, modeled on Ferris State University's Sustainable Transportation Service AAS. This course prepares you for the ASE L3 Light Duty Hybrid / Electric Vehicle Specialist test: how hybrids and electric vehicles work, high-voltage safety and de-powering, high-voltage battery systems, power electronics, motors and regenerative braking, the combustion engine in hybrids, supporting systems, diagnosis with the L3 Certification Test Reference, scan-tool and scope diagnosis, charging systems, service procedures, and common failures. Hybrid and EV high-voltage packs run roughly 200–450 V DC — lethal voltage — so safety is the through-line of the whole course. To register for the real L3 test, ASE requires you to have passed BOTH A6 (Electrical / Electronic Systems) and A8 (Engine Performance), and 3 years of hands-on work experience are required to certify. Practice exams in this course teach the material; they are not the real ASE test.

Step 11 of 12 · Automotive Service Technology program

Builds on Engine Performance (ASE A8) — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

ASE Master Technician & Advanced Cert Prep

Step 12 of the Automotive Service Technology program — the capstone. Eleven full-length practice exams built to the real ASE test specs verified against ASE's official 2026 study guides: A1 Engine Repair (45 Q, 75 min), A2 Automatic Transmission / Transaxle (45 Q, 75 min), A3 Manual Drive Train & Axles (40 Q, 60 min), A4 Suspension & Steering (40 Q, 60 min), A5 Brakes (45 Q, 75 min), A6 Electrical / Electronic Systems (50 Q, 90 min), A7 Heating & Air Conditioning (50 Q, 75 min), A8 Engine Performance (50 Q, 75 min), A9 Light Vehicle Diesel Engines (50 Q, 75 min), L1 Advanced Engine Performance Specialist (50 Q, 150 min), and L3 Light Duty Hybrid / Electric Vehicle Specialist (45 Q, 120 min) — 510 original practice questions in all. Twelve review modules recap every test area, and twelve study guides carry one guide per test plus a work-experience guide. Honesty notes, stated plainly: these practice exams are not the real ASE tests — the real tests are taken at a Prometric center, booked through ase.com, and every real ASE certification test also contains 10 unscored research questions on top of the scored count. Passing tests alone does not certify you: ASE also requires documented hands-on work experience — 2 years for A1–A9 (1 year plus a 2-year automotive training program can substitute) and 3 years for L1 and L3. L1 requires A8 passed before you can register; L3 requires A6 and A8 passed before you can register. Master Automobile Technician means A1–A8 only — A9 is a separate specialty. L1 uses the Composite Vehicle Type 4 reference booklet and L3 uses the Certification Test Reference on the real tests; this app cannot reproduce ASE's documents, so the practice exams put the reference data in the question stems instead. Certificates last 5 years, recertification tests are about half as long, and failing a test means a 30-day wait before you can buy it again. The 70% mark used here is a practice benchmark only — ASE publishes no raw percentage pass mark (it scores on a 400–999 scaled scale). No exam fees are stated anywhere in this program; check ase.com for current fees.

Step 12 of 12 · Automotive Service Technology program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

This is the final step of the program — the capstone. When the certification tracker on this page shows READY for the credentials you want, book the real exams through ASE at a Prometric center. Passing the tests is only half the credential — ASE also needs your documented work experience.