← All programs

Electrical program

Thirteen courses taken in order, modeled on Thaddeus Stevens College of Technology’s Electrical Technology (AAS) with Ferris State University’s Industrial Automation Engineering Technology (AAS) as the continuity layer — from DC and AC theory through the NEC, residential and commercial wiring, motors, controls, PLCs, and solar to a certification-prep capstone that readies you for the Michigan journeyman and master electrician exams, NCCER Electrical Levels 1–4, and the NABCEP PV Associate exam.

$50 per program · first class free — your first course is free once you sign up, then $50 unlocks the whole program.

13 courses · free to start — sign up to enroll and track your progress.

Electrical 101: Intro to the Electrical Trade, Safety & Tools

The on-ramp course of the Electrical program, modeled on the Thaddeus Stevens College of Technology Electrical Technology AAS and NCCER Electrical Levels 1–4. This course introduces what electricians do and the career paths open to them, jobsite safety and OSHA basics, NFPA 70E shock and arc-flash safety, PPE, lockout/tagout and de-energized work, hand and power tools, meters and test equipment, jobsite math, reading drawings and symbols, and the wire, cable, and devices an electrician works with every day — with a jobsite electrical safety walkthrough lab. It starts preparation toward NCCER Electrical Level 1 and OSHA 10-hour construction outreach training. All practical work in this course assumes de-energized, locked-out/tagged-out equipment under a licensed supervisor, per NFPA 70E.

Step 1 of 13 · Electrical program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical 102: DC Theory & Electrical Math

The theory course of the Electrical program, modeled on the Thaddeus Stevens College of Technology Electrical Technology AAS and NCCER Electrical Levels 1–4, with Delmar's Standard Textbook of Electricity as the textbook layer. This course teaches atoms, charge, and current; voltage, resistance, and Ohm's law; power and Watt's law; series, parallel, and combination circuits; Kirchhoff's laws; meters and DC measurement; wire resistance and voltage drop; magnetism and electromagnetism; batteries and DC sources; and troubleshooting DC circuits — with two calculation labs: an Ohm's law and power lab and a series/parallel circuit lab. All practical work in this course assumes de-energized, locked-out/tagged-out equipment under a licensed supervisor, per NFPA 70E.

Step 2 of 13 · Electrical program

Builds on Electrical 101: Intro to the Electrical Trade, Safety & Tools — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical 103: AC Theory, Power & Measurements

The alternating-current course of the Electrical program, modeled on the Thaddeus Stevens College of Technology Electrical Technology AAS and NCCER Electrical Levels 1–4, with Delmar's Standard Textbook of Electricity as the textbook layer. This course teaches sine waves and AC fundamentals, inductance and inductive reactance, capacitance and capacitive reactance, impedance and series RLC circuits, parallel RLC and resonance, true, reactive, and apparent power, power factor and correction, three-phase power in wye and delta, transformers, AC measurements with oscilloscopes and meters, harmonics and power quality, and AC troubleshooting and safety — with two calculation labs: an AC power and power-factor lab and a three-phase and transformer lab. All practical work in this course assumes de-energized, locked-out/tagged-out equipment under a licensed supervisor, per NFPA 70E.

Step 3 of 13 · Electrical program

Builds on Electrical 102: DC Theory & Electrical Math — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical 104: The NEC, Wiring Methods, Conduit & Raceways

The code-and-raceway course of the Electrical program, modeled on the Thaddeus Stevens College of Technology Electrical Technology AAS and NCCER Electrical Levels 1–4. This course teaches the 2023 National Electrical Code (NFPA 70) as adopted in Michigan under Part 8 on March 12, 2024 — how the Code is organized, how to look up a rule fast, branch circuits and feeders, conductor sizing and ampacity, grounding and bonding, box fill, wiring methods, and EMT, RMC, IMC, and PVC conduit, cable tray, raceways, and conduit bending math — with conduit-fill and box-fill calculation labs. All practical work is taught for de-energized, locked-out/tagged-out work under a licensed supervisor, per NFPA 70E.

Step 4 of 13 · Electrical program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical 105: Residential Wiring

The residential course of the Electrical program, modeled on the Thaddeus Stevens College of Technology Electrical Technology AAS and NCCER Electrical Levels 1–4. This course wires a house from the pole to the last receptacle under the 2023 National Electrical Code (NFPA 70) as adopted in Michigan under Part 8 on March 12, 2024: the residential service and service entrance, branch circuits, GFCI and AFCI protection, lighting layout and switching, kitchens and baths, laundry and appliance circuits, dwelling load calculations, reading house plans, rough-in, trim-out and testing, and inspection and troubleshooting — with load-calculation and rough-in labs. All practical work is taught for de-energized, locked-out/tagged-out work under a licensed supervisor, per NFPA 70E.

Step 5 of 13 · Electrical program

Builds on Electrical 104: The NEC, Wiring Methods, Conduit & Raceways — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical 106: Commercial Wiring

The commercial course of the Electrical program, modeled on the Thaddeus Stevens College of Technology Electrical Technology AAS and NCCER Electrical Levels 1–4. This course wires commercial buildings under the 2023 National Electrical Code (NFPA 70) as adopted in Michigan under Part 8 on March 12, 2024: three-phase commercial systems, commercial services and switchboards, feeders and panelboards, commercial branch circuits and lighting, motor circuits (Article 430), hazardous (classified) locations (Article 500), commercial load calculations, emergency and standby systems (Articles 700–702), health care and special occupancies, reading commercial plans and specs, and rough-in, trim, and commissioning — with commercial load-calculation and motor-circuit labs. All practical work is taught for de-energized, locked-out/tagged-out work under a licensed supervisor, per NFPA 70E.

Step 6 of 13 · Electrical program

Builds on Electrical 105: Residential Wiring — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical 107: Motors, Transformers & Generators

The motors-and-machines course of the Electrical program, modeled on the Thaddeus Stevens College of Technology Electrical Technology AAS and NCCER Electrical Levels 1–4. This course covers magnetism and the rotating magnetic field, DC motors and their starting and speed control, single-phase and three-phase AC motors, motor nameplates and connections, single-phase and three-phase transformers, transformer sizing and protection under the 2023 NEC, generators and alternators, standby and emergency generator systems, troubleshooting, and efficiency, power factor, and motor selection — with nameplate-math and sizing labs. All practical guidance assumes de-energized, locked-out/tagged-out work under a licensed supervisor, per NFPA 70E.

Step 7 of 13 · Electrical program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical 108: Motor Controls & Industrial Wiring

The motor-controls course of the Electrical program, modeled on the Thaddeus Stevens College of Technology Electrical Technology AAS and NCCER Electrical Levels 1–4. This course covers manual versus automatic control, contactors, relays and overloads, control transformers and pilot devices, start-stop and latching circuits, forward-reverse and jogging, sequencing and timers, reading and drawing ladder diagrams, across-the-line, reduced-voltage and soft-start motor starters, variable frequency drive basics, industrial wiring methods and panels, troubleshooting control circuits, and control panel layout and documentation — with ladder-diagram and VFD-sizing labs. All practical guidance assumes de-energized, locked-out/tagged-out work under a licensed supervisor, per NFPA 70E.

Step 8 of 13 · Electrical program

Builds on Electrical 107: Motors, Transformers & Generators — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical 109: PLCs, Automation & Industrial Controls

The automation course of the Electrical program, built on the Ferris State Industrial Automation spine and modeled on the Thaddeus Stevens College of Technology Electrical Technology AAS and NCCER Electrical Levels 1–4. This course covers the move from relay logic to PLCs, PLC hardware, discrete inputs and outputs, ladder logic programming, timers and counters, analog inputs, outputs and scaling, proximity, photoelectric and limit-switch sensors, human-machine interfaces, PLC troubleshooting and forcing I/O, industrial networks and communications, safety in automated systems, and a complete automation project walkthrough — with PLC logic and sensor-scaling labs. All practical guidance assumes de-energized, locked-out/tagged-out work under a licensed supervisor, per NFPA 70E.

Step 9 of 13 · Electrical program

Builds on Electrical 108: Motor Controls & Industrial Wiring — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical 110: Low Voltage, Fire Alarm & Data Systems

The low-voltage course of the Electrical program, modeled on the Thaddeus Stevens College of Technology Electrical Technology AAS and NCCER Electrical Levels 1-4. This course covers voice, data, and video distribution, structured cabling in copper and fiber, fire alarm systems and NEC Article 760, notification appliances and power supplies, security, access control and CCTV, nurse-call and health-care systems, grounding and bonding for low-voltage work, testing and certifying data cabling, and special and hazardous locations — all under the 2023 NEC (NFPA 70) and the Michigan Part 8 amendments adopted March 12, 2024, with all practical work done de-energized and locked out under a licensed supervisor per NFPA 70E.

Step 10 of 13 · Electrical program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical 111: Solar PV, Renewables & Energy Storage

The solar and renewables course of the Electrical program, modeled on the Thaddeus Stevens College of Technology Electrical Technology AAS and Ferris State Industrial Automation, with NCCER Electrical Levels 1-4 as the training backbone. This course covers how solar cells make electricity, grid-tied, off-grid, and hybrid PV systems, modules, arrays, and racking, string, micro, and hybrid inverters, NEC Articles 690 and 705, batteries and energy storage, charge controllers and DC coupling, site assessment, shading, and sizing, net metering, interconnection, and permits, and commissioning, monitoring, and maintenance — closing with NABCEP PV Associate exam review. All code content is anchored to the 2023 NEC (NFPA 70) and the Michigan Part 8 amendments adopted March 12, 2024, and all practical work is done de-energized and locked out under a licensed supervisor per NFPA 70E.

Step 11 of 13 · Electrical program

Builds on Electrical 103: AC Theory, Power & Measurements — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical 112: Estimating, Business & the Michigan Licensing Path

The business side of the trade: reading a job and taking it off, estimating materials and labor, bidding and proposals, contracts and change orders, running a shop, and the full Michigan path from registered apprentice to journeyman to master to contractor — with the exam formats, the hour requirements, and the rules that keep a license in good standing.

Step 12 of 13 · Electrical program

Builds on Electrical 105: Residential Wiring — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Electrical Certification Prep

The capstone of the Electrical program, sequenced after the Thaddeus Stevens College of Technology Electrical Technology AAS model courses and the Ferris State University Industrial Automation continuity, and built on the NCCER Electrical Levels 1–4 backbone with the 2023 NEC plus Michigan Part 8 amendments. This course prepares you for the Michigan journeyman and master electrician exams, the four NCCER Electrical level assessments, the NABCEP PV Associate exam, and the Michigan fire alarm specialty technician exam — with 8 practice exams (456 original questions), 6 study guides, 12 review modules, and 4 drills labs — plus knowledge-ready guidance for the OSHA 10 DOL card. Its exams are PRACTICE exams with original questions in the real exams' style and format, and the app certifies no one: real Michigan exams are scheduled through PSI, real NCCER tests happen only at accredited sponsors with hands-on performance profiles, the OSHA DOL card comes only from an authorized trainer, and the NABCEP PV Associate is a scaled-score exam.

Step 13 of 13 · Electrical program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

This is the final step of the program — the capstone. When the certification tracker on this page shows READY for the credentials you want, book the real exams through the approved providers listed there. The practice exams here do not grant credentials or licenses — Michigan exams are scheduled through PSI, NCCER tests are taken at accredited sponsors, and the NABCEP PV Associate exam passes at a scaled score of 65, not a percentage.