← All programs

General Construction program

Fifteen courses taken in order, modeled on Iowa Lakes Community College’s Construction Technology Management (AAS) with Ferris State University’s Construction Management (B.S.) as the continuity layer — from the trade, tools, and safety through framing, concrete, finishing, equipment, welding, ironworking, and landscape and hardscape to a certification-prep capstone that readies you for NCCER, OSHA 10/30, and ACI Flatwork Finisher.

$50 per program · first class free — your first course is free once you sign up, then $50 unlocks the whole program.

15 courses · free to start — sign up to enroll and track your progress.

Construction 101: Intro to Construction & Jobsite Safety

The on-ramp course of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS and NCCER Core. This course introduces the construction trades and how a job runs from first stake to final walkthrough, jobsite safety and OSHA basics, PPE and hazard communication, the OSHA Focus Four, fall protection, ladders and scaffolds, electrical and trench safety, hand and power tool safety, first aid and fire safety, and construction math basics — with a hands-on jobsite safety walkthrough lab. It starts preparation toward NCCER Core and OSHA 10-hour construction outreach training.

Step 1 of 15 · General Construction program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Construction 102: Construction Math, Tools & Materials

The second course of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS and NCCER Core and Carpentry. This course builds the math and materials fluency every builder needs: reading a tape measure, fractions and decimals, geometry for area and volume, lumber and engineered wood, steel and concrete basics, fastener and adhesive selection, hand and power tools, and rigging basics — with measurement and calculation drills and a materials-selection lab. It prepares learners for blueprint reading, estimating, and framing.

Step 2 of 15 · General Construction program

Builds on Construction 101: Intro to Construction & Jobsite Safety — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Construction 103: Blueprint Reading & Construction Drawings

The third course of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS and NCCER print-reading training, with the textbook layer of Brown & Dorfmueller's Print Reading for Construction. This course teaches learners to read a full construction drawing set: plans, elevations, sections, and details, schedules and specifications, symbols and abbreviations, scaling and dimensioning, and residential and commercial print sets — with labs in reading a print set and scaling and takeoff from drawings. It prepares learners for site layout, framing, and estimating.

Step 3 of 15 · General Construction program

Builds on Construction 102: Construction Math, Tools & Materials — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Site Layout, Surveying & Earthwork

Step 4 of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS with Ferris State University Construction Management continuity. This course teaches reading site plans, surveying and leveling, squaring a building with the 3-4-5 method, batter boards and building layout, soils and compaction, excavation and trench safety, grading and drainage, utilities, and erosion control — with planning and calculation labs. It prepares students for NCCER Core and Carpentry Level 1 module work.

Step 4 of 15 · General Construction program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Concrete & Masonry

Step 5 of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS with Ferris State University Construction Management continuity. This course teaches concrete properties and mix design, quantity estimating, formwork, rebar, placing, finishing, and curing, plus slabs, footings, foundations, and block, brick, and stone masonry — with planning and calculation labs. It prepares students for NCCER Core and Concrete Finishing module work and the ACI Concrete Flatwork Finisher written exam.

Step 5 of 15 · General Construction program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Framing I: Floors & Walls

Step 6 of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS with Ferris State University Construction Management continuity. This course teaches how a wood frame carries loads, lumber species and grades, sill plates and floor layout, joist sizing and span, subfloor, wall framing, openings, raising and bracing walls, sheathing, ceiling framing, and fasteners — with planning and calculation labs. It prepares students for NCCER Core and Carpentry Level 1 module work.

Step 6 of 15 · General Construction program

Builds on Construction 103: Blueprint Reading & Construction Drawings — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Framing II: Roofs, Stairs & Exterior Shell

The second framing course of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS with continuity from Ferris State Building Construction Technology Management. This course covers roof systems and pitch, common rafter layout and calculation, ridge, hip, valley, and jack rafters, roof trusses, decking and sheathing, underlayment, ice and water protection and ventilation, roofing materials, stair math and stringer layout, windows and exterior doors, and the weather barriers that make the exterior shell tight — with hands-on rafter, stair, and roofing takeoff labs. Textbook layer includes Modern Carpentry and NCCER Carpentry. This is a planning and calculation course: it does not certify hands-on skill.

Step 7 of 15 · General Construction program

Builds on Framing I: Floors & Walls — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Interior & Exterior Finishing Trades

The finishing course of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS with continuity from Ferris State Building Construction Technology Management. This course covers the finish sequence from dry-in to punch list, drywall hanging, taping, and finishing, insulation and the building envelope, interior trim and finish carpentry, interior doors and hardware, hardwood, laminate, and engineered flooring, tile, vinyl, and carpet, cabinet layout and installation, countertops and backsplashes, painting, siding, and finish schedules, punch lists, and quality control — with hands-on quantity takeoff and finish-schedule labs. Textbook layer includes Modern Carpentry and NCCER Carpentry. This is a planning and calculation course: it does not certify hands-on skill.

Step 8 of 15 · General Construction program

Builds on Framing II: Roofs, Stairs & Exterior Shell — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Mechanical Systems in Construction

The mechanical coordination course of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS with continuity from Ferris State Building Construction Technology Management. This course teaches the builder's view of HVAC, plumbing, and electrical rough-in: reading mechanical plans and coordination drawings, duct, pipe, and wire rough-in, penetrations and firestopping, clearances and service space, sequencing, inspections, coordination conflicts, energy and ventilation basics, and handover — with hands-on rough-in coordination and penetration planning labs. This is a builder-coordination course, not trade-certification training: it does not teach trade certification material, and it does not certify hands-on skill. Never work on live equipment; electrical and gas work belongs to licensed professionals.

Step 9 of 15 · General Construction program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Heavy Equipment Operation

The heavy equipment course of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS and NCCER Heavy Equipment Operations. This course covers dozers, excavators, loaders, backhoes, forklifts, and telehandlers: pre-operation inspection, controls and instruments, grading and grade math, trenching and excavation safety, maintenance, and hand signals and spotting. It teaches inspections, controls, grade math, hand signals, and safety — not operation itself: there is no simulator in the app, and real NCCER Heavy Equipment Operations credentials also require hands-on performance verification.

Step 10 of 15 · General Construction program

Builds on Site Layout, Surveying & Earthwork — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Welding for Construction

The welding course of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS and NCCER Welding Level 1. This course covers oxyfuel cutting, SMAW (stick), GMAW (MIG), and FCAW welding, weld symbols and print reading, metallurgy basics, structural connections, and weld inspection. It teaches welding knowledge — processes, symbols, metallurgy, procedures, and inspection — and states plainly that bead quality, travel speed, and puddle control cannot be graded from text, and the AWS Certified Welder credential is performance-only: weld a test coupon to a WPS at an AWS Accredited Test Facility. There is no written exam and no numeric pass score.

Step 11 of 15 · General Construction program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Estimating, Codes & Construction Management

The estimating and management course of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS and Ferris State University Construction Management B.S. This course covers quantity takeoffs, labor and material costing, bids, contracts, scheduling and the critical path, building codes (IRC/IBC overview), permits and inspections, and running a crew and a job. Labs are planning and calculation exercises only — they do not certify anyone or grade hands-on skill. No fees are stated anywhere in this course, and no Michigan builder license requirements are stated, because those figures were not verified.

Step 12 of 15 · General Construction program

Builds on Concrete & Masonry — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Ironworking

The ironworking course of the General Construction program, modeled on the Iowa Lakes Community College Construction Technology Management AAS and NCCER Ironworking Level 1. This course covers the three kinds of ironwork, the raising gang and its roles, trade safety at height, ironworking tools and equipment, rigging, structural connections, decking, reinforcing steel, and welding for ironworkers. It teaches ironworking knowledge only — and states plainly that ironworking is hands-on work at height: bead quality, rigging feel, and balance on open steel cannot be graded from text, and the real trade is learned in an apprenticeship. Ironworkers hold no state license; the credentials that matter are the union book, the OSHA 10/30 card, and NCCER or AWS credentials.

Step 13 of 15 · General Construction program

Builds on Heavy Equipment Operation — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Landscape, Hardscape & Site Preparation

The landscape, hardscape, and site-preparation course of the General Construction program, modeled on Portland Community College's Landscape Technology AAS with Cincinnati State Landscape Horticulture (NALP-accredited) as continuity and Foothill/SBCC hardscape content. This course covers site assessment and soil, grading/drainage/erosion control, surveying, hardscape materials, paver patios, retaining walls, steps and outdoor structures, planting and turf, irrigation and lighting, estimating and client care, and sequencing a finished job. It teaches landscape construction knowledge only — it cannot grade hands-on installs, which can only be judged in person on real work. Michigan has no state landscape contractor license, while pesticide application needs a separate state applicator license.

Step 14 of 15 · General Construction program

Builds on Concrete & Masonry — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Construction Certification Prep

The capstone of the General Construction program, sequenced after the Iowa Lakes Community College Construction Technology Management AAS model courses and the Ferris State University Construction Management B.S. continuity, and built on Modern Carpentry, NCCER Core, and the ACI Concrete Flatwork Finisher workbook. This course prepares you for the NCCER Core Level Test, OSHA 10/30, NCCER Carpentry Level 1, NCCER Welding Level 1, NCCER Heavy Equipment Operations Level 1, NCCER Ironworking Level 1, and the ACI Concrete Flatwork Finisher written exam — with 8 practice exams (629 original questions), 8 study guides, 12 review modules, and 4 numbers-drill labs — plus knowledge-ready guidance for the AWS Certified Welder credential. Its exams are PRACTICE exams with original questions in the real exams' style and format, and the app certifies no one: real NCCER tests happen only at accredited sponsors with hands-on performance profiles, the OSHA DOL card comes only from an authorized trainer after the required hours, the ACI Finisher certification also requires a separate hands-on performance exam, and AWS Certified Welder is performance-only at an Accredited Test Facility.

Step 15 of 15 · General Construction program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

This is the final step of the program — the capstone. When the certification tracker on this page shows READY for the credentials you want, book the real exams through the approved providers listed there. The practice exams here do not grant credentials — NCCER tests are taken at accredited sponsors, the OSHA DOL card comes only from an authorized trainer, and the AWS Certified Welder test is a hands-on weld at an Accredited Test Facility.