← All programs

Plumbing & Pipefitting program

Twelve courses taken in order, modeled on Thaddeus Stevens College of Technology’s Plumbing Technology (AAS) and the NCCER Plumbing Levels 1–4 curriculum — from the trade, tools, and safety to a certification-prep capstone that readies you for the Michigan journeyman license, NCCER, and ASSE certification.

$50 per program · first class free — your first course is free once you sign up, then $50 unlocks the whole program.

12 courses · free to start — sign up to enroll and track your progress.

Plumbing 101: Introduction to the Plumbing Trade, Safety & Tools

The on-ramp course of the Plumbing & Pipefitting program, modeled on the Thaddeus Stevens College of Technology Plumbing Technology AAS and NCCER Plumbing. This course introduces the plumbing trade and the path to licensure, jobsite safety and OSHA basics, PPE and hazard communication, hand and power tools, ladders and scaffolds, materials handling, first aid and fire safety, reading a job, and tool care — with a hands-on jobsite safety walkthrough lab. It starts preparation toward the Michigan journeyman plumber license and NCCER certification.

Step 1 of 12 · Plumbing & Pipefitting program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Plumbing 102: Plumbing Math, Drawings & Blueprint Reading

Part of the Plumbing & Pipefitting program, modeled on the Thaddeus Stevens College of Technology Plumbing Technology AAS and NCCER Plumbing. This course covers the math and the drawings everything downstream depends on: fractions and decimals, measurement and conversions, ratios and slope, geometry and pipe capacity, the Pythagorean theorem and simple and rolling offsets, reading plumbing drawings, commercial drawings, and isometric drawings, plus specifications, submittals, and takeoff and estimating — with a hands-on rolling-offset calculation lab. It continues preparation toward the Michigan journeyman plumber license and NCCER certification.

Step 2 of 12 · Plumbing & Pipefitting program

Builds on Plumbing 101: Introduction to the Plumbing Trade, Safety & Tools — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Plumbing 111: Plastic Pipe & Copper Tube

Part of the Plumbing & Pipefitting program, modeled on Thaddeus Stevens College of Technology's Plumbing Technology AAS and the NCCER Plumbing curriculum. This course covers the two materials a new plumber touches first — plastic pipe (PVC, CPVC, ABS, and PEX) and copper tube (Types K, L, M, and DWV) — including how to choose them, join them, support them, and pressure-test them, with a hands-on copper sweat-soldering lab. It builds preparation toward the Michigan journeyman plumber license and NCCER certification.

Step 3 of 12 · Plumbing & Pipefitting program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Plumbing 112: Cast Iron, Steel Pipe & Joining Methods

Part of the Plumbing & Pipefitting program, modeled on Thaddeus Stevens College of Technology's Plumbing Technology AAS and the NCCER Plumbing curriculum. This course covers the heavy pipe materials — cast iron and steel — and the joints that hold them together: gasketed and no-hub cast iron, threaded steel, CSST gas piping, flanged, grooved and welded joints, welding basics, and brazing, with a hands-on steel pipe threading lab. It builds preparation toward the Michigan journeyman plumber license and NCCER certification.

Step 4 of 12 · Plumbing & Pipefitting program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Plumbing 121: Drain, Waste & Vent (DWV) Systems

Part of the Plumbing & Pipefitting program, modeled on Thaddeus Stevens College of Technology's Plumbing Technology AAS and the NCCER Plumbing curriculum. This course covers the drainage system that protects public health: how DWV systems work, drainage fixture units, traps and trap seals, venting methods, sizing drainage and vent piping to the 2021 Michigan Plumbing Code (IPC 2021), installation, testing, building sewers, and roof, floor, and area drains, with hands-on scenario labs in rough-in layout and DWV testing. It builds preparation toward the Michigan journeyman plumber license and NCCER certification.

Step 5 of 12 · Plumbing & Pipefitting program

Builds on Plumbing 111: Plastic Pipe & Copper Tube — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Plumbing 122: Water Distribution & Supply Systems

Part of the Plumbing & Pipefitting program, modeled on Thaddeus Stevens College of Technology's Plumbing Technology AAS and the NCCER Plumbing curriculum. This course covers getting clean water to every fixture at the right pressure: water supply fundamentals, sizing the water service and distribution piping by fixture units, hot water systems and tempering, pressure control and water hammer, installation and testing, valves, cross-connections and backflow basics, water quality and treatment, private wells and pumps, and freeze protection, with a hands-on scenario lab in water supply sizing. It builds preparation toward the Michigan journeyman plumber license and NCCER certification.

Step 6 of 12 · Plumbing & Pipefitting program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Plumbing 131: Fixtures, Faucets & Water Heaters

Part of the Plumbing & Pipefitting program, modeled on Thaddeus Stevens College of Technology's Plumbing Technology (AAS) program and the NCCER Plumbing curriculum, under the 2021 Michigan Plumbing Code (based on IPC 2021). This course covers the fixtures customers actually see and touch — water closets, lavatories, sinks, tubs, showers, faucets, and water heaters — including installation, accessibility, venting, relief valves, thermal expansion, and service, with a hands-on water heater install lab. It continues preparation toward the Michigan journeyman plumber license and NCCER certification.

Step 7 of 12 · Plumbing & Pipefitting program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Plumbing 132: Fuel Gas, Electricity for Plumbers & Water Treatment

Part of the Plumbing & Pipefitting program, modeled on Thaddeus Stevens College of Technology's Plumbing Technology (AAS) program and the NCCER Plumbing curriculum, under the 2021 Michigan Plumbing Code (based on IPC 2021) and the International Fuel Gas Code. This course covers the systems behind the fixtures: fuel gas piping and sizing, gas testing and leak detection, fuel oil basics, basic electricity and lockout/tagout, heating controls, potable water treatment, corrosive-resistant waste piping, and compressed air — with a hands-on gas pipe sizing and leak test lab. It continues preparation toward the Michigan journeyman plumber license and NCCER certification.

Step 8 of 12 · Plumbing & Pipefitting program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Plumbing 201: Plumbing Codes, Sizing & System Design

Part of the Plumbing & Pipefitting program, modeled on Thaddeus Stevens College of Technology's Plumbing Technology AAS (PLBG 207 Design III: Plumbing Codes) and the NCCER Plumbing curriculum. This course teaches the 2021 Michigan Plumbing Code, based on the 2021 International Plumbing Code: how codes are made and enforced, how to read and navigate the code book, fixture counts, water supply sizing, sanitary drainage sizing, vents, traps and interceptors, and storm drainage — with open-book code lookup drills and full-system sizing labs. It starts preparation toward the Michigan journeyman plumber license and NCCER certification.

Step 9 of 12 · Plumbing & Pipefitting program

Builds on Plumbing 122: Water Distribution & Supply Systems — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Plumbing 202: Backflow Prevention, Pumps & Special Waste

Part of the Plumbing & Pipefitting program, modeled on Thaddeus Stevens College of Technology's Plumbing Technology AAS and the NCCER Plumbing curriculum (Levels 3–4). This course protects the drinking water supply: backflow, cross-connections, and the four backflow assemblies (RPZ, DCVA, PVB, SVBA) with step-by-step ASSE 5110 test procedures, plus sewage and sump pumps, ejectors and lift stations, grease interceptors, septic systems, pools, stormwater, and water conservation. It starts preparation toward the Michigan journeyman plumber license, NCCER certification, and the ASSE 5110 backflow tester credential.

Step 10 of 12 · Plumbing & Pipefitting program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Plumbing 203: Service, Commercial & Specialty Systems

Part of the Plumbing & Pipefitting program, modeled on Thaddeus Stevens College of Technology's Plumbing Technology (AAS) program and the NCCER Plumbing Level 4 curriculum, under the 2021 Michigan Plumbing Code (based on the 2021 International Plumbing Code). This course covers the working plumber's day — service calls and diagnostics, drain cleaning and leak detection, commercial installation, hydronic and solar heating, medical gas and vacuum systems, well water systems, and mobile-home plumbing — plus the business and crew-leadership skills of the trade, with hands-on scenario labs in drain diagnosis, boiler fill and purge, and medical gas brazing procedure. It continues preparation toward the Michigan master plumber path, NCCER Plumbing Level 4, and ASSE 6010 medical gas installer certification.

Step 11 of 12 · Plumbing & Pipefitting program

Builds on Plumbing 201: Plumbing Codes, Sizing & System Design — take that course first if you have not finished it.

Start learning free Log in

Sign up free to enroll in this course and track your progress.

Plumbing Certification Prep

The capstone of the Plumbing & Pipefitting program, sequenced after the Thaddeus Stevens College of Technology Plumbing Technology (AAS) model courses and the NCCER Plumbing Levels 1–4 curriculum, and built on the 2021 Michigan Plumbing Code (IPC 2021). This course prepares you for the Michigan journeyman and master plumber exams, NCCER Plumbing Levels 1–4, ASSE 5110 Backflow Tester, ASSE 6010 Medical Gas Installer, and OSHA 10/30 with blueprint-by-blueprint review, timed numbers drills, and hands-on sizing practice. Its exams are PRACTICE exams with original questions in the real exams' style and format — the real exams are taken through approved testing providers — and the real credentials come only from the certifying bodies: NCCER tests at accredited sponsors, ASSE tests at approved schools, and the Michigan license through LARA and PSI. Completing this program does NOT by itself make anyone a licensed journeyman — Michigan requires 6,000 registered apprentice hours first — and UA journeyman status comes only from completing the apprenticeship.

Step 12 of 12 · Plumbing & Pipefitting program

Start learning free Log in

Sign up free to enroll in this course and track your progress.

This is the final step of the program — the capstone. When the certification tracker on this page shows READY, book the real exams through the approved providers listed there.